Search

Used Fuel Valve Assembly

Reproduction generator for the model 500 and 500A stove. New generator includes new gas tip, spring, and tip cleaning needle.

Solid brass nut for the model 345, 348, 500, & 502 stoves. Possibly used in other applications also. Refer to the parts diagram of your model if unsure.

Stem (lighter) assembly. This was the last style used on the 500B Canadian Stove, will also work on the 500 and 500A. This is a rare part.

Bracket for the model 500 and 500A stove - Bracket ONLY

If you need just the screw it is HERE.

This is the ring that attaches to the collar of the lantern so you can hook a chain to it. Rings are stainless.

Reproduction generator needle for the model 500 and for the 345 kerosene marine stove.

Small nut for bottom of stove grate.

Bracket screw for the model 500 and 500A stove - Screw ONLY.

If you need just the bracket it is HERE.

Reproduction generator nut for the 500 and 500A stove.

1/2 inch long screw for the 500 stove. Requires two for the Cap and Fillers. See description tab for more details.

1/4 inch long screw for the 500 stove. Used on the baffle, see description tab for more details. Two are required for the 500 stove.

Used collar for the model 500A stove.

Used burner assembly for the model 275 series lanterns.

Bernzomatic stove decal.

NOS generator nut for the model 500 and 500A stove.

Reproduction fuel tube for the Model 457, 460 and 575 Handy Gas Plant. Also fits stove models 375, 375A, and 376.

Valve wheel for Handy Gas Plant.

Large leather pump cup for the T-Handle pumps, kitchen ranges, and other larger appliances. The flat portion of the cup measures 1" wide. For pump barrels with a 1 1/4 inch diameter.

This is a reproduction filler cap insert for the large filler caps as used on Handy Gas Plants, Radiant Heater #2, Remote Tank 457 and 465, and other large tanks.

This is a NOS filler cap insert for the large filler caps as used on Handy Gas Plants, Radiant Heater #2, Remote Tank 457 and 465, and other large tanks.

NOS, HGP cap. Fits models 457, 457G, 575, 460, 470G Handy Gas Plants. Also fits the 465 Tank. 

This is a large filler cap gasket for the Handy Gas Plants. It also works for the Tilley R1 heater.

New filler cap screw for the small 242 & 249 lanterns and 500 stove size filler caps.

This is a reproduction air stem for the large filler caps as used on Handy Gas Plants, Radiant Heater #2, Remote Tank 457 and 465, and other large tanks.

Gas tip.

Fuel and Air Tube for many stoves. Same as part number 425-6461.
Fits 2G, 2H, 4F, 6B, 6F, 9A, 9B, 9G, 9H, 415C, 415D, 416B, 416C, 417B, 425 models, 500, &500A.

Cap Gasket for M1942 & M1950 stoves.

Filler cap insert for the models 242, 242A, 242B, 242C, 243, 243A, 234, 234A, 247, 249 and other similar lanterns and lamps that take the smaller filler cap.  Also fits the model 500 stove. Will have a new gasket installed.

This is a used old copper funnel. Smaller spout end fits the model 242 series lanterns and 500 stoves well.

Used brass filler cap. Will all vary in wear and amount of brass faded. Fits the model 242, 242A, 242B, 242C, 242K, 243, 243A, 247, 249 lanterns and the model 500 stove.

Will come with a new gasket for you to install if needed.

This is a used filler cap for the 242 lanterns. Fits the model 242, 242A, 242B, 242C, 242K, 243, 243A, 247, 249 lanterns and the model 500 stove.  

Comes with a new gasket for you to installed if needed.

Valve stem assembly for burner 556; generator 486-262; handy gas plant 458, 458G; heater 15, 16; and stove 373.

Pump plunger for the model 505. Also fits the 222 series lanterns.

This is a used filler cap for the 242 lanterns. These have wrench marks on them. They will work just fine if you need a cheap filler cap. Fits the model 242, 242A, 242B, 242C, 242K, 243, 243A, 247, 249 lanterns and the model 500 stove. Comes with a new gasket that you will have to install.

This small gasket is for the model 242, 242A, 242B, 242C, 243, 243A, 234, 234A, 247, 249 and other similar lanterns and lamps that take the smaller filler cap. 

Also fits the model 500 stove and the early 520 stoves. The green filler cap is shown for identification purposes only and is not included.

This is a 10 PACK of gaskets for the model 242, 242A, 242B, 242C, 243, 243A, 234, 234A, 247, 249 and other similar lanterns and lamps that take the smaller filler cap. 

Also fits the model 500 stove and the early 520 stoves. The green filler cap is shown for identification purposes only and is not included.

Small pump Leather for the model 1950 stove. Also fits the M1942 stove. Measures roughly 3/4" at it's widest point.

Leg for the M1950 military stove.

New Old Stock M1950 burner frame.

For the model M1950 or 536 stove.

Pump check valve pip for M1942 stove.

Vaporizer screen for the model 530 stove. Would also work in other similar military stove vaporizers such as the M1950, 523 and 520. To install, roll between fingers to reduce diameter slightly, and insert into generator/vaporizer.

Fuel tube gasket for the model M1950 military stove.

M-1942 Mod Tip Cleaner Graphite packing for all companies who manufactured the stove.  

Original reproduction wrench for the model 536 or M1950 stove. 

Parts tube for the M1941, M1942, 520 and 523 military stoves. Each contains a new vaporizer, gas tip, large packing, and 3 screens. LINK for great info on these and what they fit.

Reproduction wooden knob for the M1942 stove tip cleaner. Made of solid walnut. Identical to the original.

This is the spring used in the non return valve located in the bottom of the pump. Reproduction part.

This is the spring used in the non return valve located in the bottom of the M1942 pump. Reproduction part.